4 Ways To Fix Corsair Vengeance 2100 No Sound

corsair vengeance 2100 no sound
corsair vengeance 2100 no sound

The Corsair Vengeance 2100 can be a bit heavier when you compare them with other wireless headsets. Noise isolation is also another area where this headset has average performance because the earmuffs won’t seal correctly on your headset. However, there are a lot of great features like high-quality sound and the headset will work even when you’re far away from the USB dongle.

Unfortunately, some customers did complain about no sound comping from their Corsair Vengeance 2100. If you’re having similar issues with your Corsair Vengeance too then this article might help you fix the problem.

How to Fix Corsair Vengeance 2100 No Sound?

  1. Check Output Device

The first mistake that most users make while using a wireless headset is that they don’t switch the output device from the sound settings. That is probably why you are also not able to get any audio to come from the Vengeance headset.

So, to check the output device you will need to access the windows audio settings and then switch the audio output device to Corsair Vengeance. Once the output device is set you will be able to hear sound from the headset as long as the USB dongle is connected to the PC.

  1. Check Dongle

It is recommended that users plug the USB dongle directly into the back of the system. No sound issues were happening for users that had the dongle connected to a USB extension or the front panel of the PC.

So, just change the port you’re using for the USB dongle and that should help you fix the sound issue from your Corsair Vengeance headset. Make sure to also move the physical volume wheel on your headset to check if that was the cause of the sound issue. Most people overlook the physical button and there is a good possibility that you did too.

  1. Reinstall Drivers

It is also possible that your sound drivers are malfunctioning which is why you can’t get any audio from your headset. Luckily, you can remove the current drivers from the device managers and after that, all you need to do is reboot the PC and your windows will install the drivers themselves.

So, if you don’t know how to remove sound drivers just look it up on YouTube and follow a video guide for a better understanding of the process.

  1. Faulty Headset

If everything checks out but you’re still not getting sound from your Corsair Vengeance 2100 then we would suggest that you seek help from professionals. But if the support team from Corsair can’t help you out then the only option, you’re left with is to buy a new headset.

There possibility that your device is faulty increases as even the support team wasn’t able to help you get around the sound issues with your Corsair Vengeance.

The community forum is also a great place to get help if you want to keep going through troubleshooting steps. Who knows, you might get lucky and your headset will start working again if your try enough troubleshooting steps.

Leave a Comment

Share via
Copy link