5 Ways To Fix Corsair K70 Not Detected On Windows 10

Corsair has a lot of great gaming keyboards, whether they be wired or wireless. These devices are packed with all kinds of helpful settings and features that let players make the very most out of them by adjusting the way that they like.

One of many examples that can be provided when it comes to good gaming keyboards from Corsair is the K70. It is a very simple but handy device with lots of good uses for specific types of games.

While it is certainly very helpful, that can only be said when the keyboard is being detected by your computer in the first place. Sometimes, the Corsair K70 is not detected on Windows 10. There are a number of different reasons for this, such as issues with drivers, software, or even the keyboard itself.

Luckily all these aren’t as serious as they sound and are fairly easy to fix. If you are looking for these fixes for this issue, you’ve come to the right place. We have all the different solutions that one needs for fixing this problem listed below.

How to Fix Corsair K70 Not Detected on Windows 10?

1. Uninstall Previous Keyboard Drivers

If this is your first time or at least one of the first times using the Corsair K70, there is a very likely reason for this issue. This reason is the set of keyboard drivers that users likely had installed for the previous one that they were using before this.

If this is indeed the case, the solution is awfully simple. All users need to do is open up the device manager through the Start menu on Windows 10 and then find these previous drivers. Now just uninstall them all, leaving only those that are compatible with the Corsair K70.

2. Different USB Port

Another very simple and easy solution worth trying out is simply unplugging the wire of the Corsair K70 from the USB port on the CPU and then reconnecting it after a few minutes. While this sounds too good and easy to be true, it’s actually a very effective solution most of the time since unplugging and plugging back the keyboard allows Windows 10 to recognize the device at times.

3. Manually Install Drivers

A big problem with this issue is that users can’t use the Corsair Utility Engine to solve it either. That’s because the software obviously won’t be able to help fix issues related to the Corsair K70 if it can’t even recognize the device in the first place. But there is one way to change this, as the iCUE program provides a way to manually install drivers onto your computer.

To do so, go to the iCUE folder and try to locate the menu with all the different drivers. From here, try installing the ones that are related to the Corsair K70. Once they have been installed, restart the computer and check to see if the keyboard is being detected now.

4. Reset the Corsair K70

Resetting the device entirely might allow Windows 10 to identify it, and for users to start using it properly. There is a simple method for resetting all Corsair keyboards. While the method might vary depending on the specific peripheral from the brand, the one needed for the Corsair K70 is especially simple.

The first thing to do is unplug the keyboard from the CPU. After doing so, press and hold down the Esc key. Now just plug the Corsair K70 back in while holding down this key, and release it after exactly 5 or more seconds. The device’s lights will flash if the reset is successful, and Windows 10 will start detecting it now.

5. Reinstall Windows

If even all this wasn’t enough to help users fix the problem, there is one last solution that is a bit more extreme in comparison to the rest mentioned so far. This solution requires you to completely uninstall Windows 10 from the computer and then reinstall it once more. Once the reinstall is complete, all problems with Windows not detecting devices such as the Corsair K70 will be fixed.