The Turtle Beach Stealth 400 was introduced to be the perfect wireless headset for your PlayStation consoles. Even though the performance on this headset is great, we have seen many users run into charging problems with the headsets.
Speaking of which, if you have also found your Turtle Beach Stealth 400 not charging, then you have come to the right place! Using this article, we will be explaining how you can get this issue fixed for good. So, without wasting any time further, let’s dive right in!
Turtle Beach Stealth 400 Not Charging
1. Faulty USB Port
The most common reason why your headset is not charging might be due to the fact that you are using a faulty USB port. Though if that is the case, then you should be able to get it resolved with quite an ease.
All you have to do is to change the USB port through which you are trying to charge the headset. If none of the UBS ports seem to work, we recommend temporarily trying to connect the headset to any other device to see if that works.
2. Inspecting The Cord
Another thing that you will need to check is the cord itself. There’s a good chance that you might have some fault with the wire. However, before you rule that out, we suggest checking whether you have the cord plugged in all the way.
Most of the time, we have seen how users simply didn’t fully plug their wire. This is why we strongly recommend that you make sure that the cord is plugged in all the way. Once you have made sure of that, you should also check if there are any possible problems with the wire as well.
3. Perform Cleaning
Chances are that you might be dealing with some sort of dirt or debris near the charging contacts of the headset. In such cases, you won’t be able to charge your headset unless you remove all such particles. To do this, ensure that you use a Q-tip soaked with a bit of isopropyl alcohol.
After you are done cleaning, your headset should start charging again.
4. Faulty Hardware
If you are still unable to charge your headset, then there’s a good possibility that you have faulty hardware. We’re afraid that there really isn’t anything that you can do about a faulty component except get it replaced.
The Bottom Line:
Is your Turtle Beach Stealth 400 not charging at all? We strongly advise following the instructions that we have laid above in the article. Similarly, if you find any kind of confusion while performing the troubleshooting process, all you have to do is to leave a comment below! We will reach out to you as soon as possible.