4 Approaches To Solve Turtle Beach Recon 200 Not Charging

turtle beach recon 200 not charging
turtle beach recon 200 not charging

While charging a wireless headset should be quite simple, it can be pretty annoying to have your headset not charge at all. Regarding this, a common complaint that we have seen many users make is how their Turtle Beach Recon 200 is not charging.

Even though this can happen due to a number of reasons, you will have to know how you can troubleshoot this particular issue. For this purpose, we will be listing some of the most common solutions on how you can get this issue resolved for good. So, let’s get straight into it:

Turtle Beach Recon 200 Not Charging

1. Cleaning the Charging Pins

One of the most common reasons why your headset may not charge could be because of dirt or debris getting accumulated inside the charging pin of your headset. As when these headsets are kept for a longer period of time, dirt particles can often get inside which can cause such issues to surface.

To fix this, you will have to make sure that you clean the charging pins of your headset. Ensure that you thoroughly clean the contact by using a soft toothbrush or a Q-tip.

2. Checking the Cable

Another reason why your headset may not be charging could be due to a faulty cable. However, if that is the case then all you will need to do is simply get your cable replaced with a new one. To test out your current cable, you can either try connecting any other device using the same cable or try any other cable to charge your headset.

In either case, you will know whether it is your cable that has been causing the issue or not.

3. Changing the USB Port

If you have connected your cable directly to the PC through a USB port, then you will need to make sure that you are using a working USB port. Alternatively, you can try switching to any other USB port.

4. Hardware Fault

In case your headset still isn’t charging for some reason, then it is highly likely that you are experiencing some sort of hardware fault. If it’s a faulty battery, then you can try getting your batteries replaced. However, if the damage is beyond repair, then we’re afraid that you will have to opt for a complete replacement of the device.

The Bottom Line

Annoyed with your Turtle Beach Recon 200 not charging? Most of the time, any issues with your device’s ability to charge are mostly caused because of dirt being accumulated inside the charging contact.

But if you do end up with this particular problem, then we strongly recommend following through with the instructions that have been mentioned in the article above. In case of any confusion, try leaving down a comment below!

Leave a Comment