The Logitech G502 is used for gaming by many users around the globe. Most of the users of this model are happy with the purchase decision. However, some ran into the right-click problem soon after buying the Logitech G502. For this reason, we are here with all the possible ways to troubleshoot the Logitech G502 right-click problem easily.
Logitech G502 Right Click Problem
As we know, the Logitech G502 right-click button stops working. Many users of this model ran into this problem soon after buying it. This problem is very annoying for the users and if you ran into the same problem then all the possible ways to fix this problem are listed below.
1. User Account Problem
The Logitech G502 right-click problem can show up if the user account files are corrupted. For this reason, all you need to do is to create a new user account. You can create a new user account from the control panel. After you are done creating the new account check if the problem is fixed or not.
2. Corrupt Window Files Problem
Moreover, sometimes the corrupted windows files can cause this problem to appear. Thus, to fix this problem you need to scan the SFC test. This can be done by pressing the windows plus R key. Then type CMD in the dialogue box. After that, the command prompt will be opened then all you have to do is to type SFC/scan now. As a result of this, all the corrupted files will be fixed. By doing this the mouse right-click option should start working.
3. Newly-Installed Apps Problem
On the other hand, sometimes the recently installed applications can cause the right click problem. For this case, all you have to do is to remove all the unwanted installed apps from the PC and then check if the right-click is working or not.
4. System Problem
Aside from the application problem, you can also run into this problem if there is any problem with the system. In this case, you have to hard reset the system to fix this problem completely. The hard reset can be done by removing the power cable in the case of a PC. After removing the cable, wait for a few seconds and then plug in the cable and then check if the right-click is working or not.
On the other hand, in the case of a laptop remove the power cable and the battery. Then wait for a few seconds and plug in the charger again. By doing this the problem should fix.
5. Drivers Problem
Furthermore, the right-click problem in Logitech G502 can also show up if there is any problem with the mouse drivers. In this case, all you need to do is to inspect the drivers of the mouse. If there is any problem with the drivers, then install new drivers. By doing this the problem will be fixed. The drivers can be installed via the internet or a USB flash drive. Moreover, updating the drivers will also fix this problem.
6. Hardware Problem
The right-click problem is quite common as reported by many users of the Logitech G502. If you are a user of this mouse and you ran into the right-click problem, then attempt all of the above steps to fix it. However, if you still cannot fix this problem then the problem is with the hardware. Hence, in this case, contact the technicians by emailing them the problem you ran into. By doing this the technicians will reach you back with the troubleshooting of this problem.
Conclusion
All in all, the Logitech G502 right click problem can be fixed easily by attempting the steps given below
- Create a new user account
- Scan windows files through command prompt
- Remove unwanted recent installed apps
- Hard reset the PC or laptop
- Install new drivers or update the drivers
- Check the hardware
These are the steps to fix the right-click problem easily. However, if are still stuck in this problem even after attempting all of the steps given above then all you have to do is to take technical support by contacting the company. By doing this the company will replace the mouse with the new one if the mouse is under warranty. On the other hand, the company can also fix the mouse without replacing it if the problem is not big.