There’s no denying the fact that the Blue Yeti Nano is one of the finest dedicated microphones that you can get, especially if you want high-quality audio output out of a microphone. For its price point, the device performs extremely well, but if it’s your first time using it, you could run into problems with the microphone. Talking about this, one really common problem associated with the Blue Yeti Nano is getting a flashing yellow light. This is why today; we will be sharing further instructions on how you are supposed to troubleshoot this particular problem through the following steps:
Blue Yeti Nano Flashing Yellow Light Fix
1. Setting the Sampling Rate
The yellow flashing light on your Blue Yeti usually points to a sampling mismatch. To fix this, you will have to make your way to the software that is using your microphone in the first place. Most of the programs have the sampling rate set to 44.1KHz which can cause issues as the microphone does not support this.
Similarly, all you have to do is to set your sampling rate to 24-bit 48KHz instead. You can do this by accessing your Control Panel. In the same way, if you are using dedicated audio software, you will have to manually find its settings and ensure to set the correct sampling audio rate.
2. Re-plugging Your Microphone
As simple as this may sound, we have noticed plenty of users be able to resolve the flashing light problem by simply re-plugging their microphones.
Likewise, we recommend that you do the same thing and try plugging the microphone back into your computer after you unplug it. Also, ensure that you have the Sherpa software installed through which you should be able to configure the microphone.
3. Restarting Your PC
Oftentimes, the microphone can act up whenever there is a bug with your Windows. To prevent any such bugs from occurring in the first place, you can try restarting your PC. This should remove all such bugs from your PC.
4. Contacting Support
In case the issue seems to persist even after you have tried all the instructions previously mentioned, there’s a good chance that you are dealing with a more technical problem. In this case, your best bet would be to refer to the support team and get additional help on the matter. They should be able to advise further solutions that can be tried for fixing the issue.
The Bottom Line:
Is your Blue Yeti Nano flashing yellow light? Most usually, this error occurs whenever there is a mismatch with the sampling audio rate that you have set. To be more specific, your microphone only supports the use of 48KHz which is why you have to make sure to set your sampling rate accordingly.