Are you having trouble with your phasmophobia controller not working? If so, don’t worry! The problem might be minor, and you can fix it with the advice below.
In fact, you may never have heard of phasmophobia before! But now that you have, you should be able to make sure this doesn’t happen again—at least in the future.
If your fear ever comes back to haunt you again, simply remember these tips so your Steam controller will work properly once more!
How to Resolve Phasmophobia Controller Not Working?
- Check The USB Cable
If your controller is not responding, the first thing you should check is the USB cable. If it’s plugged in properly and the controller still isn’t working, try plugging it into a different USB port on your computer or use a different cable.
If none of these solutions work, you may have an issue with your controller itself. Try pressing the reset button located on the back of your controller.
If that doesn’t work, go ahead and unplug the device from its power source for 20 seconds before plugging it back in.
Also, be sure that any programs you’re using are closed so they don’t interfere with the connection between your computer and controller.
- Look For A Firmware Update
If your controller still does not work, you may want to check for a firmware update. You can do so by connecting the controller through the Bluetooth menu on your PC.
If there is an update available, Windows will prompt you and ask if you would like to download it. Once downloaded, simply restart your computer and follow the prompts.
If this fixes the problem, you are all set! If this did not fix the problem then read on to find out more about possible solutions.
- Try Another USB Port
First, try plugging the controller into a different USB port. If you’re using an Xbox One controller on your PC, it’s important to make sure that you have the latest Xbox One drivers installed on your computer before plugging it in.
You can download them from Microsoft’s website. If that doesn’t work, try restarting your computer and/or unplugging other devices plugged into the USB ports as this could be causing a conflict with the controller.
- Restart Your Computer
If you’re using Windows, try restarting the computer and see if that helps. If it doesn’t work, try unplugging the controller for a few minutes, then plug it back in.
If that doesn’t work, make sure that the batteries are still good or replace them with new ones. You can also reset the controller by removing the batteries and holding down both thumbsticks on either side of your phasmophobia steam game controller not working for 10 seconds.
Install and set up DS4 Windows
The correct naming convention for the downloaded file is DS4Windows.exe. Once you click it, the typical setup wizard will ask you to choose a location to store your preferences and user profiles.
After that, choose Install the DS4 Driver, and the program will begin adapting any PS4 controller that is plugged in to function with Windows 8, 8.1, and 10. You must also choose Install 360 Driver if you are still using Windows 7.