Fox Float DPS PSI Calculator: Find Your Perfect Suspension Setup

🚵 Fox Float DPS PSI Calculator

Calculate the ideal air pressure for your Fox Float DPS rear shock based on rider weight, discipline, and sag target.

Quick Presets
Units
Weight Unit:
🔧 Rider & Setup Details
✅ Your Fox Float DPS Setup Results
💡 Pro Tip: Always measure sag while wearing your full riding kit (helmet, pads, hydration pack). Your combined rider + gear weight is the key input. Recheck PSI seasonally as temperature changes affect air spring pressure — cold weather can drop PSI by 5–10 psi.
📋 Fox Float DPS PSI Reference Chart
Rider + Gear Weight XC (20–25% Sag) Trail (25–30% Sag) Enduro (30–35% Sag) DH (35–40% Sag)
100–120 lbs (45–54 kg)170–185 psi145–165 psi120–140 psi105–125 psi
121–140 lbs (55–63 kg)185–200 psi160–180 psi140–158 psi120–140 psi
141–160 lbs (64–72 kg)200–220 psi178–198 psi155–175 psi138–158 psi
161–180 lbs (73–81 kg)218–240 psi195–218 psi172–194 psi155–175 psi
181–200 lbs (82–90 kg)235–260 psi212–238 psi190–215 psi172–195 psi
201–220 lbs (91–99 kg)255–278 psi228–255 psi207–232 psi188–213 psi
221–250 lbs (100–113 kg)270–300 psi245–275 psi222–252 psi205–232 psi
📏 Sag Measurement Quick Reference
Shock Stroke 25% Sag (mm) 28% Sag (mm) 30% Sag (mm) 33% Sag (mm)
44mm11mm12.3mm13.2mm14.5mm
51mm12.8mm14.3mm15.3mm16.8mm
55mm13.8mm15.4mm16.5mm18.2mm
57mm14.3mm16.0mm17.1mm18.8mm
62mm15.5mm17.4mm18.6mm20.5mm
65mm16.3mm18.2mm19.5mm21.5mm
🎯 Token Effect on Air Spring Feel
Tokens Air Volume Ramp-Up PSI Adjustment Best For
0 TokensFull VolumeMost Progressive−10 to −15 psiHeavy riders, DH/Park
1 TokenReducedProgressiveStandard (baseline)Trail, Enduro
2 TokensMore ReducedLess Progressive+8 to +12 psiXC, light riders
3 TokensMinimumMost Linear+15 to +20 psiXC Race, very light riders
📊 Fox Float DPS Key Specifications
100
Min PSI
300
Max PSI
3
Max Tokens
20–35%
Sag Range
3
Rebound Clicks
44–65mm
Stroke Range
1 pos
Lockout
Fox HP
Pump Required
🔧 Setup Order: Set PSI first → measure sag → adjust rebound (start fully closed, open until wheel tracks smoothly) → set compression (begin fully open, add as needed) → test ride and fine-tune. Increase PSI by 10 if bottoming out; decrease by 10 if suspension feels harsh.

Fox ranks between the most known makers of shock systems for mountain biking. The company offers shocks fit for any kind of riding, from cross country through to downhill. The range of Fox Float models covers many uses and knowing the differences between them helps to choose the right rear shock.

The Fox Float SL is meant for riders that want to improve their XC riding to a higher level. It keeps the three-position switch that was on the older Float DPS. Even so, although it weighs little, it lost some features because of that lightweight build.

Which Fox Float Rear Shock Should You Choose

The newest Fox Float sits between the SL and the bigger X. One describes it more as a small X than an updated DPS. Fox equipped it with a two-position compression switch instead of three (only open or closed). The middle position of the blue lever disappeared entirely.

Compared to the SL, it has a stronger bottom-out bumper and a bigger air chamber. That larger air chamber helps to give better feeling for small bumps and suport in the centre of the travel, although it adds a bit of weight. One can set the rebound damping and the air spring rate.

It includes a lightweight single Evol air sleeve that helps it react more quickly. The Factory Series version arrives with Kashima coating, that is smooth and lasts longer. The version compatible with Isolated offers more complete operation and better control of damping, getting closer to the X in function.

The extra space for cargo is sold separately.

Riders that like aggressive style find in the Float X there ideal match. It mixes freedom of tuning with light weight and solid structure. That model replaced the favourite Float DPX2 as the middle air shock from Fox with piggyback.

The Float X got a bigger air chamber for flexible initial travel, which allows you to drop the needed air pressure to around 40 PSI. Also the main piston grew, which opens space for better flow of oil inside. Compared to the X2, the X weighs less, but stays strong in the damping function.

The Performance Elite version matches the Factory, except that it does not have the Kashima finish. One can add a knob for slow rebound to the Performance model, to turn it into Elite.

Lastly, the Float X2 is meant for enduro and downhill riding. It gives comfort like a coil spring feel, together with the lightness of an air spring. The X2 is known for its big skill for setup and damping control.

But older models of X2 suffered from a known problem with the seal, which mixed air with oil in the shock and hurt its normal function. Fox handled refills outside the warranty well. The wholerange of Float gives serious riders a reliable set of options that matches their riding style.

Fox Float DPS PSI Calculator: Find Your Perfect Suspension Setup

Leave a Comment